The demo version of EULER allows you to fully familiarize yourself with the capabilities and interface of the software package. You can experience simple models of mechanical systems in action. If for any reason you can not download the demo version from our site, make a reservation for the CD with the demo version here, and we will send it to you by mail.

The demo version has the following limitations:

  • The number of objects in the project should not exceed 256;
  • The number of links in the project should not exceed 16;
  • the number of atoms in the project should not exceed 8;
  • there is no possibility to record an animation file;
  • there is no possibility to record a traffic log.

DOWNLOAD Demo EULER 12.10.04.beta (x64) - 92.5 МБ

DOWNLOAD Demo EULER 12.09.09 (x64) - 94.0 МБ

DOWNLOAD Demo EULER EULER 11.14 (x64) - 95.7 МБ

 


Software converters developed by JSC "AutoMechanics.Inc" export CAD models to the universal ECT format used for storing geometric and mass-inertial data. The ECT file can later be used in EULER, including the demo version. Thus, converters provide the possibility of "through" design, i.e. creation of a model in CAD with parallel calculation of system dynamics in EULER.

The demo version of the converter allows you to familiarize yourself with the features and interface of the program, to export a simple model from CAD to ECT-format.

The demo version of the converter has the following limitations:

  • The choice of the type of exported objects is not available: only bodies without mass inertial      characteristics are exported;
  • The quality of the facet model is only "rough";
  • Export of only visible objects;
  • Export is carried out without searching for templates (simple search of objects);
  • Limit on the number of exported objects: no more than 8 at each level of the hierarchy.

Currently, converters for the following CAD systems have been developed: Siemens PLM Software NX 7.5, PTC Creo Parametric 1.0, Dassault Systèmes SolidWorks Corp. SolidWorks 2014, Autodesk 3ds Max 2013, Autodesk Inventor.

32-bit demo versions of converters:
DOWNLOAD amNX2ECT 0.00.25 - 8.40 МБ
DOWNLOAD amCreoPa2ECT 1.02.07 - 15.2 МБ
DOWNLOAD amSW2ECT 1.01.01 - 9.64 МБ

64-bit demo versions of converters:
DOWNLOAD amNX2ECT 0.00.25 - 9.44 МБ
DOWNLOAD amCreoPa2ECT 1.02.07 - 16.3 МБ
DOWNLOAD amSW2ECT 1.01.01 - 10.7 МБ

The digit capacity of the converter must match the digit capacity of the CAD for which the converter is used.

 

Latest news

Euler version 12.10


A new version of the software package has been released

EULER 12.10

A demo version 12.09.09 of the software package is available at the link

DOWNLOAD the demo version of EULER


October, 2022

 
Новая линейка программного комплекса EULER 12

Мы продолжаем активную работу по совершенствованию программного комплекса EULER.

В настоящее время готовится выпуск новой линейки версий EULER 12, в которой произведены следующие важные изменения:

  • разработано новое расчетное ядро с существенно расширенными возможностями;
  • повышена скорость расчетов;
  • реализованы неявные методы интегрирования, применение которых на порядки уменьшает время расчета жестких систем;
  • произведен ряд улучшений пользовательского интерфейса.
 
Версия EULER 11.14

Выпущена новая версия программного комплекса EULER 11.14

Декабрь, 2020

 
Версия EULER 10.43

A new version of the EULER 10.43 software has been released.

October 2018