To check the accuracy of the calculations of the EULER PC by students and teachers of the Moscow State University. M.V. Lomonosov solved a large number of different problems in theoretical mechanics. The solution of these problems showed that the accuracy obtained in the EULER, with the appropriate specification of the numerical solution parameters, is at least six significant digits (the relative error is less than 1.0e-6). This is significantly higher than the accuracy that is normally required for engineering calculations.

The results of modeling the dynamic behavior of real mechanical systems always differ from the results of field trials. These differences are explained by the following three factors:

1.Errors in the measurement of characteristics during testing. These include the errors of the measuring sensors, the error of their installation and the error in processing the recorded readings.

2. Inaccuracies in the original model data. They are associated with the inability to accurately determine the various characteristics of the design of a mechanical system that has undergone field testing. These include the inauthenticity of specifying in the model the characteristics of elastic and damping elements, errors in geometric data and other parameters.

3. Methodical errors of the model. They are associated with the assumptions and idealizations adopted in the model in comparison with the real mechanical system and with the accuracy of calculating the model.

When simulating simple mechanisms, the discrepancy with the results of field trials is usually 1-2 percent. When modeling complex systems, these discrepancies usually are much larger.


Latest news

Новая линейка ПК EULER 12

Мы продолжаем активную работу по совершенствованию программного комплекса EULER.

В настоящее время готовится выпуск новой линейки версий EULER 12, в которой произведены следующие важные изменения:

  • разработано новое расчетное ядро с существенно расширенными возможностями;
  • повышена скорость расчетов;
  • реализованы неявные методы интегрирования, применение которых на порядки уменьшает время расчета жестких систем;
  • произведен ряд улучшений пользовательского интерфейса.
Версия EULER 11.14

Выпущена новая версия программного комплекса EULER 11.14

Декабрь, 2020

Версия EULER 10.43

A new version of the EULER 10.43 software has been released.

October 2018

Version EULER 10.31

A new version of the EULER 10.31 software has been released.

January 2018